The Lite II can be used both in and out of the supplied enclosure and can be powered continually at the mains or by the internal battery.
🔶 Assemble Enclosure
🔸Take the card reader and orient it so the camera lens is at the top. And the charging port is at the bottom.
[Photo of the Lite II face on, with the camera highlighted, and an arrow pointing to the bottom of the card reader highlighting the USB-C port]
🔸Take the USB-C charging cable and feed it up the inside of the enclosure. Connect the cable to the bottom of the card reader.
🔸The card reader is fitted with a holder, that slides on to the enclosure. Position the holder as shown and slide the card reader into place. 
🔸Carefully pull any excess cable through the bottom of the enclosure. Make sure you don’t pull it hard enough to unplug the power cable from the bottom of the card reader.
🔸Plug the card reader in to a power socket using the supplied plug. Doing so should automatically switch the device on.